CONVEYOR BELTS - RUBBER

- High resistant to abrasion, for transport of abrasive material, abradability max. 80 mm³
- Working temperature: -60 °C/+60 °C (material max. +70 °C)
- Number of inlays: 2, Strength: 250 N/mm
- Maximum width: on stock to 800 mm (to order to 1800 mm)
- Thickness of covering layers: usually 3+2 mm (and according to current offer)
- Edges cut or wrapped
- Standard length: 100 m, 200 m

- Belts are delivered unconnected or connected, when belts are divided also cut-offs are invoiced (remains)
- For recommendation of appropriate transport belt for particular application please contact our sales department

- High resistant to abrasion, for transport of high abrasive material, abradability max. 80 mm3
- Working temperature: -60 °C/+60 °C (material max. +70 °C)
- Number of inlays: 2, Strength: 315 N/mm
- Maximum width: on stock to 800 mm (to order to 1800 mm)
- Thickness of covering layers: usually 3+2 mm (according to current offer)
- Edges cut or wrapped

- High resistant to abrasion, for transport of high abrasive material, abradability max. 80 mm³
- Working temperature: -60 °C/+60 °C (material max. +70 °C)
- Number of inlays: 3, Strength: 400 N/mm
- Maximum width: on stock to 800 mm (to order to 1800 mm)
- Thickness of covering layers: usually 4+2 mm (according to current offer)
- Edges cut or wrapped
- Standard length: 100 m, 200 m

- High resistant to abrasion, for transport of high abrasive bulk material, grain material, abradability max. 80 mm³
- Working temperature: -60 °C/+60 °C (material max. +70 °C)
- Number of inlays: 3 or 4
- Maximum width: on stock to 1800 mm
- Thickness of covering layers: usually 4+2 mm (according to current offer)
- Edges cut or wrapped
- Standard length: 100 m, 200 m

- Suitable for continual transport of hot materials, abradability max. 200 mm³
- Working temperature: category D to +125 °C, category H to +150 °C, category T3 to +175 °C, category T+ to +200 °C
- Number of inlays: 2 – 5, according to required strength
- Maximum width: to order to 1400 mm
- Thickness of covering layers: usually 4+2 mm (according to current offer)
- Edges cut or wrapped
- Usually to order
- Standard length: 100 m, 200 m

- Suitable for transport of materials with content of animal fats and vegetable oils (MOR) or mineral oils (OR, G)
- Working temperature: category MOR -30 °C/+60 °C, category OR -20 °C/+100 °C
- Number of inlays: 2 - Maximum width: to order to 1800 mm
- Thickness of covering layers: usually 4+2 mm (according to current offer)
- Edges cut or wrapped
- Usually to order
- Standard length: 100 m, 200 m

-suitable for transport of materials with content of animal fats and vegetable oils (MOR) or mineral oils (OR, G)
-Working temperature: category MOR -30 °C/+60 °C, category OR -20 °C/+100 °C
-Number of inlays: 3
-Maximum width: to order to 1800 mm
-Thickness of covering layers: usually 4+2 mm (according to current offer)
-Edges cut or wrapped
-Usually to order
-Standard length: 100 m, 200 m

- rubber belt with profiled upper layer which increases the adhesion between the material and the belt
- for conveyors with the slope up to  32°C, convenient for chipping machines, for transport at the airport facilities, for bags fillers and packhouses
- uncovered play on the bottom side - determined for operation on a sliding board-lower friction factor
- number of plies: 2
- strength: 250N/mm
- upper side: profiled rubber with thickness of 5mm (continuous cover layer 2mm + 3mm of profile)
- standard width: 500, 650, 800, 1000, 1600 mm
- maximal width: 1600
- operational temperature: -60°C/+60°C